Anti-Entrapment Drain Grates

Bather Entrapment

Photo Shows Exposed PipeIn June 1999, an Indiana girl was drowned when her hair was sucked into an open pipe that was used as a suction fitting in her local swimming pool. In many older pools, open pipes that reach across the deck and into the pool are used to meet the flow requirements of water features, like the water slide pictured at left. Open pipes and drains represent serious entrapment hazards.

Tragedies such as the Indiana case can be avoided with the proper use of anti-entrapment grates or covers. New pools can avert tragedy by including stainless steel suction niches that are properly rated to ensure a low flow rate that will not trap bathers below the surface.

Older pools frequently lack grates or anti-vortex covers on the main drains in the pool. Anti-vortex covers and grates are relatively inexpensive and easy to install. Make sure that your facility is safe. Follow the guidelines below, and check your existing covers frequently.

For new construction, our custom-fabricated stainless steel suction niches and main drains are the appropriate alternative to open pipes, like that pictured above.

  • When designing new pool construction, ensure that every pump has no less than two suction outlets each, without exception. Local health codes should be consulted to determine flow rates through each outlet.
  • Make certain that no drain in your pool is unprotected by either grates or anti-vortex covers. Retrofit covers for uncovered drains and inspect all covers regularly.
  • Some gratings and drains degrade and loosen when exposed to pool chemicals and/or U.V. radiation. Replace any weakened gratings immediately with chemical and U.V. resistant covers.
  • Acquaint yourself with local building and health codes, as well as the recommendations of the NSPI regarding pool drains. These guidelines are for general information only, and should not be used as a substitute for checking with your local health authorities.

Our made-to-order anti-entrapment drain covers and grates provide protection to you and your patrons against bather entrapment. Each cover or grate is custom designed and sized to suit your pool. These covers and grates are suitable for new construction as well as retrofitting to existing main drains.

Please contact us for design assistance and pricing.

Drain Grate Main Pic
Hold your mouse pointer over the smaller images below to view them in greater detail.
Drain Grate Thumbnail 1
Drain Grate Thumbnail 2
Drain Grate Thumbnail 3
Drain Grate Thumbnail 4
Drain Grate Thumbnail 5
Drain Grate Thumbnail 6

The Eureka Anti-Entrapment Drain Grate

Eureka Manufacturing’s ASME A112.19.8- 2007 Certified and NSF Certified Anti- Entrapment Drain Grates are designed to provide the highest standard of safety and performance.

Our Anti-Entrapment Drain Grates are ideal for new construction. Their flush-mount design will pair perfectly with our custom-built stainless steel sumps, or will retrofit to many existing sumps.

Currently available in two sizes (with larger sizes on the way), our Anti-Entrapment Drain Grates will keep your aquatic facility safe with the rugged build and professional look that you’ve come to expect from Eureka Manufacturing.

Please contact us for design assistance and pricing.

Features:
  • Certified to ASME A112.19.8-2007
  • Unblockable sizes to prevent bather entrapment
  • Tough fiberglass and stainless steel construction with
    an 8-year life-span
  • 11⁄8" height allows retrofitting to many existing sumps
  • Flat design perfect for high-traffic areas
  • Custom stainless steel sumps designed to match our
    covers are available
PDF Documents: